Ovlac MINIVID, Operating Instrucions And Spare Parts

Page: 8 / 42

8
Fig.4
Fig.5
Fig.6
CORRECT INCORRECT
4.3
– OTHERS ADJUSTMENTS
The length of the third point should be adjusted so that the frame
works in a parallel position with respect to the field since, if not, the first
bodies would plough at a different depth than the rear ones achieving
an uneven labour (Fig. 4).
For the same reason, check that the beams work vertically to the
field (Fig.5). To achieve this, make sure that the lifting arms of the
tractor are at the same height and act on the adjusting bolts A at the
headstock (Fig. 6).
IMPORTANT:
Care should be taken not to take curves at work,
especially with very wide tools, because the effort lever can cause
serious damage to the structure of the machine.