6.
- Transport
and
parking
13
D
B
C
Fig. 20
Fig. 18
Fig. 19
In order to ease
transport,
is
recommended to display the
Mini-
F
at half-turn position for a minimum width. Optionally, if there·s no
transport and/or control wheel attached, a blocker (T) can be equipped, which blocks the Mini-F at half-turn position in a safe way.
Ploughs can be
equipped optionally with polyvalent control/transport wheels. For using this wheel in its transport position you must follow
the next steps:
-
Slightly elevate the plough and place the wheel on its transport position. For that you must remove the bolt B, turn the wheel over its
holder, and place the bolt on its C position (Fig. 15). Ovlac transport wheels are designed for maximum comfort and easy to use, no operation
on the damper neither the depth tops needed.
-
Block the oscillating shaft through the bolts B1.
-
Act over the pull of the locker placed in the headstock so the blocking bolt shows off the rear part.
-
Act the turning of the plough for it to be blocked in half turning position.
-
Lay the plough and remove the 3rd point.
The support pawn assures an static position of the plough on the parking.