HOME MONITOR
2.4 First time installation
done before normal operation (Note: Devices comes with Camera/Viewer
pair needs no pairing as they are already pre-paired in the factory).
Choose the zone for paring by pressing ZONE1 to ZONE4. Press <MENU>
to go to main menu, and then press <UP> and <DOWN> to select sub-menu
<PAIRING> to start the pairing action.
Press <ENTER> to start pairing function. At this moment, the wireless
device should also be entered into pairing state. This can be done by:
Depends on the camera type, either
(1) Power OFF and Power ON the device, or
(2) Press <Pairing> key if presented.
No further pairing is needed for subsequent use. Just switch on the
devicesin future and the camera and viewer units are already pair.
P.7
OV2411
