OVHS084-OSD User Manual
Page 3 of 4
Instruction:
1. Connect the
Quick Disconnect Cord
and connect it to back of the phones as picture below:
OpenScape 35G & 55G
OpenScape
CP200/205/400/600/600E
OpenStage 30/40/60/80
2. Adjust the length of the headband and turn the earpieces slightly until the headset fits
comfortably.
3. Rotate the microphone boom to put the microphone in front of the mouth.
4. To optimize the position of the microphone, adjust the microphone stem in either direction so the
microphone is close to the corner of your mouth and the white dot at the microphone should be
facing to your mouth.
5. Attach the clothing clip at a comfortable level to keep the headset properly positioned and free
form the cord’s weight.
6. Press the headset key on the telephone keypad to get dial tone to the headset, answer an
incoming call and disconnect call.
Location of the headset key on different Unify phone models may be different.
Unify OpenScape and OpenStage Headset key location
OpenScape 35G & 55G
OpenScape CP Models
OpenStage Models
