OV915WVA Quick Installation Guide
4
2
Right-click the Ethernet connection icon and choose
Properties
.
3
On the
General
tab select the
Internet Protocol (TCP/IP)
component and click
Properties
. The
Internet Protocol (TCP/IP) Properties window appears.
4
Select the
Obtain an IP address automatically
button.
5
Select the
Obtain DNS server address automatically
button.
6
Click
OK
to save the settings.
3.2 Win7 System
Set a fixed IP address
1
Choose
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2
Choose
Change Adapter Settings
>
Local Area Connection
. Right-click
Local Area Connection
, and
choose
Properties
.
3
Double-click
Internet Protocol Version 4 (TCP/IPv4)
.
4
Select
Use the following IP address
, set the IP address on the network segment of 192.168.1.x (x
can be any number from 2 to 255), and then click
OK
to go back to the previous page.
Obtain an IP address automatically
1
Choose
Start
>
Control Panel
>
Network and Interne
t >
Network and Sharing Center
.
2
Choose
Change Adapter Settings
>
Local Area Connection
. Right-click
Local Area Connection
, and
choose
Properties
.
3
Double-click
Internet Protocol Version 4 (TCP/IPv4)
.
4
Select
Obtain an IP address automatically
and
Obtain DNS server address
automatically
, and then click
OK
.
3.3 MAC OSX System
1
Click
icon on the upper left corner to display the hidden menu.
2
Choose
System Preferences
.
3
Click
Network
icon.
By default the automatic wired connection is Ethernet DHCP. If DHCP of the repeater is enabled, you can
use this connection without IP address configuration. Click
Apply
to finish setting.
If DHCP is disabled, you have to configure the IP address manually. Enter the IP address, for example,
192.168.1.2, and then click
Apply
to finish the configuration.
