Ovislink OV504WN_Quick Installation Guide
2
Figure 1 Connecting the DSL router
The following table describes the interfaces or the buttons on the rear panel.
Interface
Description
WPS
This button is used for enabling WPS PBC mode. If WPS is
enabled, press this button, and then the wireless router starts to
accept the negotiation of PBC mode.
ADSL
RJ-11 port, for connecting the ADSL cable.
LAN 1~4
RJ-45 port, for connecting the router to a PC or another network
device.
Power
Power interface, for connecting the power adapter.
Power switch.
Reset
Press the button for at least 1 second and then release it. System
restores the factory default settings.
Warning:
Do not press the
Reset
button unless you want to clear the current settings. The
Reset
button is in a small circular hole on the rear panel. If you want to restore the
default settings, please press the
Reset
button gently for 1 second with a fine needle
inserted into the hole and then release the button. The system reboots and returns to
the factory defaults.
The power specification is 12V, 1A. If the power adapter does not match the
specification, it may damage the device