5.>Check the box to enable the Universal Repeater Mode , and enter with a
SSID . Then click the “Apply Changes” button to save the setting.
6.> Click “Reboot Later” button , then configure the WAN setting
Page 1: ...se switch the bar to client mode connect your PC to N MINI s ethernet port via a LAN cable then connect the supplied power adapter and power on the N MINI 2 Ensure that your PC and N MINI are on the same network segment say your PC s IP is 192 168 1 100 subnet mask 255 255 255 0 3 Open the browser and enter 192 168 1 253 to login the web management 4 Press the Basic Settings and select WISP mode f...
Page 2: ...5 Check the box to enable the Universal Repeater Mode and enter with a SSID Then click the Apply Changes button to save the setting 6 Click Reboot Later button then configure the WAN setting ...
Page 3: ...8 Choose the WAN Access Type from the pull list depends on your ISP s internet access assign 9 Then click the Apply Changes button to save the setting 10 Click Site Survey to search your WISP s AP 11 Choose your WISP s AP then click Connect button ...
Page 4: ...12 Then click Reboot to reboot the N MINI 13 If N MINI could not get public IP successfully please check whether the WAN settings and security settings are correct ...
