25
4.3.7 WPS
WPS is designed to ease set up of security Wi-Fi networks and subsequently network
management. This router supports WPS features for AP mode, AP+WDS mode,
Infrastructure-Client mode, and the wireless root interface of Universal Repeater mode.
Disable WPS:
Check this box and clicking “OK” will disable WPS function. WPS is turned
on by default.
WPS Status:
When Router’s settings are factory default, it is set to open security and
un-configured state, some registers such as Vista WCN can configure AP. Otherwise If it
already shows “Configured”, it means that the router has setup its security.
Self-PIN Number:
It is AP’s PIN.
Start PBC:
Clicking this button will invoke the Pus Button Configuration of WPS. If one
station wants to connect to the AP, it must click its PBC button in two minute. You can see
the wps led flash this time.
Note:
This router also has a hardware button, it is same button with reset. When click this
button less than two seconds, the AP will run PBC function and the wps led flashes two
Summary of Contents for OT-1044ns
Page 1: ...User Manual OT 1044ns...
