EN
5.
Power cord
6.
Lug wrench
7.
Screwdriver
The power adapter is not supplied. Use the power supply of the following
parameters: 5V 1A
2. Plug connection diagram (see fig. 2):
1.
LED’s plug
2.
Controller’s plug
3.
Motor’s plug
4.
Battery’s plug
5.
On/off switch and power indicator
3. How to pair controller with car (see fig. 3):
•
Slide the switch on the car into „ON” to activate the vehicle.
•
Slide the controller’s switch into „ON”. Power LED will go on.
•
If the LED fails to go on, check the controller’s batteries for suitable condition
and proper assembly.
•
Wait for about 15 seconds until the controller has connected to the car.
4. Description of controller (see fig. 4):
1.
Turn left
2.
Turn right
3.
Forward
4.
Brake/Reverse
5.
Acceleration adjustment
6.
Reversed direction of throttling valve operation
7.
On/Off switch
8.
Reversed direction of control knob operation
9.
Power/connection LED
Summary of Contents for X-Wave
