Overmax X-Quest, User Manual

Page: 12 / 46

EN
30.
Storage batteries must be taken out of the toy before charging.
31.
Do not short circuit power terminals.
Battery: 3.7 V DC 100 mAh
Operation frequency: 2.405 - 2.475 GHz
Max output power: -30.00 dBm
Content of the set
1.
Car RC x2 (fig. 1)
2.
Obstacles (fig. 2)
3.
Controller x2 (fig. 3)
4.
Battery x2 (fig. 4)
5.
USB cable (fig. 5)
List of controller parts (fig. 6)
1.
Power light
2.
Left/right turning knob
3.
On/off key
4.
Speed adjustment
5.
Go forward/reverse control throttle
How to install batteries in the controller
Open the battery cover (fig. 7). Insert two batteries AA 1.5V. Pay special attention
to battery poles. Close the battery cover.
How to charge and install batteries in the car
1.
Connect the battery to USB cable, and then connect USB cable to PC or
USB charger (fig. 8). We recommend the charger 5V DC 2A.
2.
The red power light means charging. If the power light is off, it means
the battery is full.
3.
Open the battery cover in the car with the use of screwdriver supplied
(fig. 9), and next insert the full-battery plug in car plug. Close the battery
cover (fig. 10).
4.
When you no longer use the device, it is advisable to charge the battery
for about 25 minutes. If you do not use the device for a long time, it is
advisable to discharge the battery and fully recharge it once a month.