EN
The shredder may operate continually for not more than 2 minutes. After this
period, wait for about 40 minutes until the motor cools down. Do also the
following:
1.
Unplug the shredder and wait for about 40 minutes to restart the
protection.
2.
Take the paper out of the shredder slot.
3.
Supply power to the shredder again and set the switch into reverse mode
REV position to remove the paper completely.
4.
Set the switch into AUTO. When red OVER HEATED indicator does not
emit light, the shredder is ready for work.
When the shredder is jammed/clogged (e.g. due to too many sheets of paper):
1.
Set the switch into REV mode to take the jammed paper out.
2.
Set the switch into AUTO mode.
3.
The shredder is ready for work.
Remember to empty the chip bin regularly and do not let it overflow.
The pictures and figures are for reference only. The real design of the products
may differ from the pictures and figures presented.
Summary of Contents for Edge
Page 1: ...User Manual Instrukcja obsługi EN PL HR HU Edge RO ...
Page 2: ...www overmax eu ...
Page 28: ...www overmax eu ...
