Overmax CamRoad 4.5, User Manual

Page: 5 / 45

2. Using a USB port:
You can also charge your camera by connecting it to a USB port in a computer
using a USB cable. It is not necessary to turn on the camera in order to charge it.
Memory card insertion / removal
1.
Insert a TF memory card into the camera card slot according to the
indicated direction, and make sure that it is properly secured.
2.
In order to remove the card from the slot, push it gently to unlock it and
then pull it out.
Remarks:
1. If the camera is on, it turns off automatically just after the card insertion.
In order to start to use it, you need to turn the camera on again.
2. If a memory card is not recognized, remove it and then insert it into the
camera card slot again. If it does not work, please try to use another card.
3. We recommend using MicroSD cards with a Speed Class 6 or 10.
Operations
1. Turning on / off
Press and hold the Power button to turn the device on / off.
2. Switching between modes
Short press the Mode button to switch between the camera modes in the
following order: video mode - photo mode - preview mode.
3. Settings
Press the Menu button to open the system settings interface.
4. Recording
When the device enters the video mode, the camcorder icon appears on the
screen. In order to start recording, just press the OK button. The red LED blinks
during the recording. To stop the recording process, press the OK button again.
The red LED stops blinking.
You can also zoom in and out while recording.
5. Video mode settings