Assembly drawing
3
Floorboy XL300
Floorboy XL300
Step 10 - Install pad holder or brush.
Keep pad holder or brush flat on the floor, take
hold of base moulding and lift machine with both
hands, align brush holder pad with pad holder or
brush, push base moulding hard, make pad holder
or brush level and place it properly.
Step 12 - Remove pad holder or brush.
Lay the machine on its back with the handle lying
on the floor. Turn over base moulding backward
and shown pad holder or brush, remove pad holder
or brush on the brush holder pad.
Step 13 - Put the handle back to
vertical position to lock it by the foot-
pedal.
Step 14 - Tighten the handle and make
the two wheels drop to the ground than
you can push or pull the machine to move.
Step 15 - Release the handle by
pressing on the pedal, and start to
work
Step 11 - The assembly is completed
now.
3
