UFO Camp Light & Speaker
SET-UP & CARE INSTRUCTIONS
6
UFO COMPONENT DETAILS
USB OUTPUT INTERFACE
DC POWER SUPPLY INTERFACE
MAIN LAMP INDICATOR LIGHT
BATTERY SWITCH
Mobile phone and other (5V/1A)
electrical components can be charged
using the USB port on the UFO. Insert
USB and charging will begin
automatically. USB charging will shut
off automatically after
20 min of non-use.
Insert external USB adapter to
charge UFO.
You can choose what power source to
use by toggling the switch from solar
to external battery.
UFO COMPONENT DETAILS
To ensure that the lithium battery is fully charged,
please charge the battery one (1) extra hour after
the green charging indicator has turned on.
Notice: Lithium battery will only charge with main
power switch is in the solar power
option. When lithium batteries fall below 3.0V all
outputs will be disabled and enter into shutdown
mode or low voltage protection. This is done to
protect the lithium battery from complete dis-
charge.
1. Use USB charging adapter (5V/2A)
2. Use 12V vehicle power (5V/2A)
3. Use Solar cells on the UFO to charge lithium batteries.
4. Remove”
