WWW.OVERLANDVEHICLESYSTEMS.COM
833.226.4863
OVERLAND VEHICLE SYSTEMS
4. Take the bottom bracket and fit it under your cross bar; this way,
the bolts will go through either side.
5. Attach one nut on each bolt and tighten them using a 13mm wrench.
IMPORTANT: Tighten the bolts simultaneously so pressure is equal
on both sides.
3、 Once the top has fully opened, reach up and grab the base of
the ladder.
4、 Undo the Velcro strap and extend the ladder.
5、 Push down on the ladder, as it acts as a lever and lowers the
extended tent base.
6. Repeat process 2-5 on all 4 corners
IMPORTANT: After installation, be sure to check all brackets to
ensure everything is secure. Troubleshoot the tent by shaking
the bushveld back and forth and possibly going for a short drive.
Doing this will ensure that the tent doesn’t shift.
1. Unlock the fastening soft strap and release the reinforced straps
2.With your hand push up the hard shell handle. The gas struts
will automatically open the rest of the tent on its own.
OPENING THE HARD SHELL
