10401076-001
©2020-21 Overland-Tandberg
19
RDX QuikStor Internal SATA III Device Reference Guide
3 Installation Information
IMPORTANT: As system-mounting and grounding are outside our control, Overland-Tandberg cannot be
held responsible for any problems due to systems not meeting the relevant testing standards.
Rear Connectors
The SATA Power Connector and SATA Host Interface are located at the rear of the Drive. The
location of the connectors is shown in
Figure 2:
Rear View of SATA III Drive and Features
Power Dissipation
The maximum allowed internal temperature in the Drive in operating mode is limited by the
media. The ambient temperature should be kept between 10°C and 40°C (50 to 104°F), humidity
between 20% and 80%, and maximum Wet Bulb temperature is set to 29°C (84°F).
The host server must provide sufficient airflow to keep the HDDs in the RDX media within their
allowable temperature range as long as the ambient temperature does not exceed 40°C (104°F).
Care should be taken, when designing a system, to provide sufficient cooling to meet the
specifications above.
SATA Power Connection
SATA Host Connection
