–4–
–5–
–6–
http://support.overlandstorage.com
You can get additional technical support on the Internet at the
Overland Storage Support web page
, or
by contacting Overland Storage using the information found on the
Contact Us
page on our web site.
OD11017
©2013-14 Overland Storage, Inc.
4.
Push in the
latch
until it clicks,
locking the assembly in the bay.
5.
Repeat
Steps 2–4
for
each
remaining drive carrier.
Attach the Bezel
1.
Position the
bezel
with the top and bottom edges aligned with the slots on the
front of the appliance.
2.
Push the
bezel
onto the unit until the retaining clips on the ends latch and the
bezel snaps into place.
3.
Verify that the bezel is
aligned
properly with all the LEDs visible and the Power
Panel on the left side is in line with the hole on the bezel flange.
Step 4
Cable Attachment
All cabling, power connections, and cooling vents are located on the rear panel of the
unit.
1.
Power OFF the
system
(XS-series head unit and its expansion units).
2.
Connect the
SAS cable
that came with the SnapExpansion to the upper rear port
(IN).
Connect the
other end
to either the
XS-series head unit or a previously
installed SnapExpansion (upstream).
On an “upstream” SnapExpansion, connect the cable to the lower rear port (OUT).
For an XSR 40 appliance, the optional PCIe SAS card must be installed.
3.
Attach both power cords to the
AC power
sockets on the unit.
4.
Plug the
power cords
into a UPS appliance or a properly grounded AC power
source.
NOTE: The XSR-series head unit controls the power to any attached SnapExpansion XSR
units. Before powering ON the head unit, be sure all expansion units are connected and
plugged in. Turning on the head unit will cause all the attached expansion units to power
on. The SnapExpansion XSR Power button is an override option only.
5.
Press the front
power switch of the head unit
for no more than one second.
SAS Port
AC Power
(OUT)
SAS Port
(IN)
Step 5
User Guides
For detailed information on configuring your
SnapExpansion XSR, refer to the
SnapServer
Administrator’s Guide for GuardianOS
or the
GuardianOS
Release Notes
.
They are
available online
at:
http://docs.overlandstorage.com/snapserver
Translated versions of this Quick Start Guide are also
available on the web page.
Warranty and Technical Support
For warranty and general technical support information,
see our
Contact Us
web page:
http://www.overlandstorage.com/company/contact-us/
index.aspx
For information on contacting Overland Technical Support,
see our
Contact Support
web page:
http://docs.overlandstorage.com/support
To search for more service information, visit our
Expert Knowledge Base System
:
http://support.overlandstorage.com/kb
