The Snap Server® 12000 Motherboard Tray Assembly
Snap Server 12000
4
Field Service Documentation
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Removing the Ethernet Card from the Old Motherboard Tray Assembly
1
Unscrew the top screw that attaches the Ethernet card bracket to the
motherboard tray.
Set the screw aside in a safe place. You use it later to attach the Ethernet card
bracket to the new motherboard tray.
2
Remove the old Ethernet card.
Installing the Ethernet Card on the New Motherboard Tray Assembly
1
Insert the Ethernet card into the slot on the new motherboard.
Press firmly to be sure the card is seated properly in its slot. Avoid contact with
metal surfaces on the card. Grasp or press the edges only.
2
Replace and tighten the screw connecting the Ethernet card bracket to the
motherboard tray.
Top
screw
Bracket
Ethernet
card
