Part Number 10400120-102 06/2007
©2007 Overland Storage, Inc.
W
Page
1
of
4
REO™ 4500x Expansion Appliance
Quick Start Guide
This document describes how to unpack and install a REO
4500x Expansion Appliance into a standard RETMA 19"
rack. The appliance has a 2U form factor.
Before unpacking the unit, ensure that the area is free
from conditions that cause electrostatic discharge (ESD).
Discharge static electricity from your body by touching a
known grounded surface. Also, avoid touching pins, leads,
or circuitry.
First Things First—Activate Your Warranty!
Before installing your new unit, it is essential that you
activate your REO warranty. Technical and warranty
support are not available until this is done. All you need to
do is register your unit:
1.
Go to the Overland Technical Support website at:
http://support.overlandstorage.com/
2.
Using the MEMBER LOGIN E-mail and Password
fields,
log in
to the site.
NOTE: If you are not yet a member,
click the SIGN UP NOW button and
follow the instructions to become a
member. It’s free!
3.
Under MY PRODUCTS, click
Add
or Register a New Product
and
follow the on-screen instructions.
Preparing REO 4500x for Installation
Overland recommends that you install the unit in a clean,
air-conditioned environment where water and moisture
cannot enter the case of the appliance. Keep the air as free
from dust as possible.
Each REO 4500x comes with an Accessory Kit containing:
•
Rail kit and hardware
•
Power cords
•
InfiniBand-to-MiniSAS cable
•
MiniSAS-to-MiniSAS cable
•
This quick start guide
CAUTION:
Overland strongly recommends that you install power
conditioning and an adequately rated uninterruptible power
supply (UPS), especially in areas prone to blackouts, power
dips, and electrical storms.
The REO is intended to be grounded. Ensure it is connected to
earth ground during normal use. Installing proper grounding
helps to avoid damage from lightning and power surges.
Removing Drives from REO 4500x
WARNING: The REO 4500x is shipped with the disk
drives installed. Overland recommends that you
remove the drive carrier assemblies from the REO
to lessen the weight prior to rack installation.
CAUTION:
Verify the AC power to the appliance is disconnected
before you install or remove the drive carrier assemblies.
1.
Turn the carrier lever lock counterclockwise (
Figure 1. Unlock and Release Drive Carrier
2.
Slide the release button to the right to release the lever.
