Overland Storage PowerLoaders AIT-2, User & Installation Manual

Page: 100 / 106

A-4
u
Specifications
S
PECIFICATIONS
Acoustic Emissions
Safety
All models carry the Regulatory Agency product safety certifications Listed in Table A-8 .
Installation Considerations
Rack Mounting
If rack mounted units are installed in a closed or multi-unit rack assembly, they may
require further evaluation by Certification Agencies. The following items must be
considered:
1) The ambient within the rack may be greater than room ambient. Installation should be such
that the amount of air flow required for safe operation is not compromised. The maximum
temperature for equipment environment is 50°C. Consideration should be given to maximum
rated ambient.
2) Installation should be such that a hazardous stability condition is not achieved due to uneven
loading.
Input Supply
Check nameplate ratings to assure there is no overloading of supply circuits that could have an
effect on overcurrent protection and supply wiring.
Table A-7 Acoustic
Description Specification
Drive In Use (Intermittent robot motion
excepted) <50 dBA
Table A-8 Regulatory Agency Certifications
Certification Standard
UL Listed UL 1950
TUV/Product Service EN 60 950
GS Mark / CE Marking EMC Directive
Low Voltage Directive
Canadian UL Listed CSA 22.2 No. 950