14
Changing Light Bulbs
1. Disconnect power to door opener.
Open powerhead light cover(s) by pressing down on upper
locking tabs.
•
Replace old light bulb(s) with new.
•
Use 60 Watt MAX. incandescent bulbs or the CFL or LED
equivalent.
•
Close powerhead light cover(s).
2. Reconnect power to door opener.
•
Test light operation.
NOTE:
Use of LED bulbs may reduce the range of your remote
controls.
Visit www.OverheadDoor.com for more information and
recommendations for LED bulbs.
F. Light Bulb Replacement
WARNING
!
•
Use extreme caution when working from a ladder or step
stool or serious injury can occur.
•
When replacing light cover, make sure wires are not pinched
or near moving parts.
•
Use only properly rated incandescent, LED or CFL light bulbs.
•
DO NOT use bulbs with a rating greater than 60 Watts.
•
Use A19 size light bulbs. DO NOT use bulbs having a short
neck.
AVERTISSEMENT
!
•
Faire particulièrement attention lors de travaux effectués
depuis une échelle ou en escabeau.
•
En referment le couvercle de l’éclairage, s’assurer que les fils
ne sont ni coincés ni près des pièces mobiles.
•
Utilisez uniquement incandescence correctement classé, LED
ou des ampoules fluocompactes.
•
NE PAS utiliser des ampoules avec une note supérieure à 60
Watts
•
Utilisez A19 ampoules de taille. NE PAS utiliser des ampoules
ayant un cou court.
MAINTENANCE & ADJUSTMENTS
LIGHT BULB
LIGHT COVER
SWINGS OPEN
* Overhead Door LED light bulbs are designed
to reduce or eliminate reduced remote range
issues caused by common LED bulbs. They
also offer better product life by making them
resistant to vibration caused by the opener, and
cold or damp weather. See website for details
at www.OverheadDoor.com. recommendations
for LED bulbs.
