en
43
14.2 Inputs
In this sub-menu, the type of the sensor connected
can be adjusted for each individual input. The following
types can be selected:
• Switch
• KTY
• Pt500
• RTA11M (remote control)
• Pt1000
• None
ATTENTIoN!
System damage!
Selecting the wrong sensor type will
lead to unwanted control processes.
In the worst case, system damage can
occur!
Î
Make sure that the right
sensor type is selected!
If KTY, Pt500 or Pt1000 are selected, the channel
offset
appears, in which an individual offset can be
adjusted for each sensor.
Î
In order to select a sensor for the offset adjust-
ment, select the corresponding menu item by
pressing button
➄
.
Î
To adjust the sensor offset, select the desired val-
ue by pressing buttons
❷
or
❹
, then confi rm by
pressing button
➄
.
In- / outputs / Inputs
Adjustment channel Description
Adjustment range / selection
Factory setting
S1 … S8
Sensor input selection
-
-
Type
Selecting the sensor type
Switch, KTY, Pt500, RTA11M, Pt1000, None
Pt1000
Offset
Sensor offset
-15.0 … +15.0 K
0.0 K
CS10
CS10 input
-
-
Type
CS type
A … K
E
Offset
Delete offset
Yes, No
No
Imp.1
Impulse input
-
-
Type
Selecting the sensor type
Impulse, Switch, KTY, Pt500, RTA11M, Pt1000, None
Impulse
Gd (1, 2)
Digital Grundfos sensor 1, 2 -
-
Type
Grundfos sensor type
10-200 l / min, 5-100 l / min, 2-40 l / min (fast), 2-40 l / min,
1-20 l / min, 1-12 l / min
1-20 l/min
Mo (1 … 5) S (1 … 5) Module sensor
-
-
Type
Selecting the sensor type
Switch, KTY, Pt500, RTA11M, Pt1000, None
Pt1000
Offset
Sensor offset
-15.0 … +15.0 K
0.0 K
Irradiation sensor offset
If an irradiation sensor is to be connected, an offset
has to be carried out before the connection is made.
To carry out the offset, proceed as follows:
Î
Adjust the CS type in the
Type
channel.
Î
Select the
offset
channel.
Î
Confi rm the reset enquiry with Yes.
Î
Select back to return to the Inputs menu, then
connect the CS sensor.
