3
Valves, controls and systems
Thermostat “pinox H“
Installation and operating instructions
EN
Read installation and operating instructions in their entirety
before installing the single-lever thermostat!
Installation should only be carried out by qualified
tradesmen!
The installation and operating instructions, as well as other
valid documents must remain with the user of the system!
1. 1 General information
1.1 Information regarding installation and operating instructions
These installation and operating instructions serve the installer to install
the thermostat “pinox H” professionally and to put it into operation.
Other valid documents – manuals of all system components as well as
valid technical rules – must be observed.
1.2 Keeping of documents
These installation and operating instructions should be kept by the user
of the system.
1.3 Copyright
The installation and operating instructions are copyrighted.
1.4 Symbol explanation
Safety guidelines are displayed by symbols. These guidelines are to be
observed to avoid accidents, damage to property and malfunctions.
WARNING indicates a possible dangerous
situation which may lead to death or serious injury if the safety guidelines
are not observed.
NOTICE indicates a possible damage to
property which may occur if the safety guidelines are not observed.
WARNING
CAUTION
Content
1. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Transport, storage and packaging . . . . . . . . . . . . . . . . . . . . . . . 3
4. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6. Installation / Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
9. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Subject to technical modifications.
101216580 10/2016
For an overview of our global presence visit
www.oventrop.de.
Illustr. 1.1 Thermostat “pinox H” with collar nut cover
2. Safety notes
2.1 Correct use
Safety in operation is only guaranteed if the thermostat is used correctly.
Thermostats are used in conjunction with thermostatic valves in hot
water central heating or cooling systems for room temperature control,
e.g. for radiators, surface heating/cooling systems, floor convectors or
similar heat exchangers.
Any use of the thermostat outside the above applications will be
considered as non-compliant and misuse. Claims of any kind against the
manufacturer and/or his authorised representatives, due to damages
caused by incorrect use cannot be accepted.
The observance of the installation and operating instructions is part of
the compliance terms.
2.2 Possible dangers at the installation location or during transport
The case of an external fire was not taken into consideration when
constructing the thermostat.
WARNING
Risk of injury!
The thermostatic valve and the pipework may get
very hot during operation and can lead to scalding. Do not touch
without safety gloves or inactivate the heating system before work
commences.
3. Transport, storage and packaging
3.1 Transport inspection
Upon receipt check delivery for any damages caused during transit.
Any damage must be reported immediately upon receipt.
3.2 Storage
The thermostat “pinox H” must only be stored under the following
conditions:
• Do not store in open air, keep dry and free from dust.
• Do not expose to aggressive fluids or heat sources.
• Protect from direct sunlight and mechanical agitation.
• Storage temperature: –10 °C up to +50 °C,
max. relative humidity of air: 95 %
3.3 Packaging
Packaging material is to be disposed of in an environmentally friendly
manner.
4. Technical data
4.1 Performance data
Control range:
7….28 °C
Graduation on cap:
* 1 - 5
Sensor element:
Liquid sensor
Max. sensor temperature:
50 °C
Max. heating water temperature:
120 °C
