oventrop EEP A5-10-02, Installation And Operating Instructions Manual, Page: 19 / 24

Function and commissioning “R-Tronic RT B” (ENOCEAN)
19/24
6.3 Subsequent modifi cation of the EEP profi le
If the EEP profi le shall be modifi ed subsequently or a wrong EEP profi le has
been activated,
the factory settings of the thermostat have to be restored .
A different respectively the correct profi le can then be activated in the course
of the new installation (see paragraph 6.1 on page 12).
1. Switch to the setup menu by
pressing the menu-button until
BACKLIGHT will appear on the
display.
2. Turn the menu-button all the way to
the right until
FACTORY SETTINGS
will be displayed.
3. Press the menu-button. RESTORE
will be shown on the display.
1
2
3
The factory settings of the “R-Tronic RT B” (ENOCEAN) are restored as follows:
Opening of the
setup menu: Keep
pressed for
3 seconds