SPECIAL SAFETY INSTRUCTIONS FOR THE KETTLE
It is recommended to use filtered or tap water when filling the kettle.
The water level must be within the MIN and MAX marks.
Switch off the kettle before removing from the base.
Always ensure that the lid is tightly closed.
The base and exterior of the kettle must not become wet.
Always make sure that the kettle is positioned properly on its power base.
The kettle will automatically shut off once it reached the designated temperature.
USING THE KETTLE
1.
Refer to Figure 1 to open the kettle.
2.
Fill the kettle with water up to desired level. Do not overfill to prevent the risk of spillage.
Use the water level indicator to measure the desired amount of water.
3.
Put the base on a dry and flat surface.
4.
Place the kettle on the base.
5.
Connect the kettle to a properly installed 110-120V 50/60Hz socket.
6.
Insert the plug to the socket.
7.
Switch on the kettle (Refer to figure 4). The LED will light up to indicate that the
kettle is working. After boiling, the kettle switches off automatically.
8.
Disconnect the kettle from the main power supply
4
ovente.com
Summary of Contents for KS27 Series
Page 8: ...5 ovente com ...
