Step 1:
Using a Phillips screwdriver (not supplied), secure one large board
(1)
to one upper
board
(2)
with 12mm M4 screws
(C)
. Place a protective cover on the top and bottom corners
of the large board
(1)
.
Repeat this process with the remaining large board
(1)
and upper board
(2)
. This will result in
two board assemblies.
C
(x10)
ASSEMBLY
Note:
Do not use power tools when assembling this bed as they may cause damage to the
components.
7
7
7
2
C
C
C
1
x2
7
