7
USING YOUR HEATED THROW
BEFORE FIRST USE
Remove any promotional material and packaging from the heated throw .
Your climate control heated throw can be safety used on any part of the body, although
the advice of a doctor should be obtained if you are in any doubt .
TURNING YOUR HEATED THROW ON
Ensure the detachable controller is connected
to the heated throw . Plug
the cord in
to
a
240V
power outlet and switch the power on .
To turn on the heated throw, slide the control
switch to the ‘ON’ position . The red indicator
lamp will illuminate and the display will show
setting “O” .
SETTING THE HEAT TEMPERATURE
Adjust the temperature b
y
pressing the digital
control button to choose a heat setting between
1-9 . This can be achieved by contonuously
pressing the “SEAT HEAT” button until the
desired setting is reached (depending on
personal requirements and warmth required) .
Allow 10-20 minutes for the digital heated throw
to reach operating temperature .
The climate control heated throw has nine
customised heat settings operated by a push
button on the detachable controller .
The nine settings allow you to choose the
right balance of heat depending on your
personal requirements .
The numbers on the digital display correspond
to the following temperatures:
0 = No heat
1-3 = Low Heat (recommended for continuous use)
4-6 = Medium Heat
7-9 = High Heat
If the heated throw is misused (by folding, etc) the
n
the throw will turn off and the
numeric display will flash with the number “0” . The heated throw must then be switched
off and allowed to cool before turning on again .
To turn the heated throw off, slide the control switch to the ‘OFF’ position . Switch the
power off at the power outlet and remove the plug .
NOTE: Do not leave the heated throw in contact with skin for excessive periods of
time.
Summary of Contents for Heated throw
Page 1: ...OVELTHROWBB OVELTHROWGB Heated throw User manual...
Page 7: ......
