14
1.
Place the support bar’s anchor (I) back on it’s wall mark, and mark the position of it’s holes.
2.
Drill a hole on the center marks with a ø5/16” (8mm) drill bit.
3.
Insert the wall anchors (II) using a rubber mallet. Fix the center fitting on the support bar’s anchor (I) using
the screws (JJ).
4-7.
Install again the support bar (H) onto the fixed panel (C) and support bar anchor (I). Strongly tighten the
bolts using Allen key.
SUPPORT BAR INSTALLATION
1
I
4
6
H
3
5
7
II
I
JJ
I
2
ø5/16”
8mm
GG
