background image

p. 10

CONTROLS DESCRIPTION

POWER indicator:

The light will turn RED 

when the toilet is powered 

ON.

The light will turn off when 

the toilet is powered OFF.

ECO MODE indicator:

The light will turn GREEN 

when the ECO MODE is 

active.

The light will turn off when 

the ECO MODE is not 

active.

WATER 

HEATING  

indicator:

The light will turn RED 

when the water heating  is 

active.

The light will turn RED 

when the water heating  is 

not active.

SEAT HEATING 

indicator:

The light will turn RED 

when the seat heating  is 

active.

The light will turn RED 

when the seat heating  is 

not active.

SEAT SENSOR 

indicator:

The light will turn RED 

when the Seat Sensor is 

active.

The light will turn off when 

the Seat Sensor is not 

active.

BEEPING SOUNDS DIRECTIONS

LONG BEEPING

 = The toilet will give out one LONG beeping sound every time it SUCCESSFULLY receives a command.

SHORT BEEPING

 = The toilet will give out one SHORT beeping sound every time it UNSUCCESSFULLY receives a 

command.

POWER:

Pressing this key will stop any ongoing function.

Pressing for 3 seconds will turn the power ON / OFF.

SPRAY/MOVE:

Pressing this key will initiate the Static Spray Cleaning function. 

Press it again to change to the Back-&-Forth Spray Cleaning function.

*The SPRAY refers the 1 water jet function of the nozzle.

DRYING:

Pressing this key will initiate the Static Air Drying function. 

While not seated on the toilet, pressing this key for 5 sec. will turn the AUTOMATIC 

DRYING function ON/OFF.

BIDET/MOVE:

Pressing this key will initiate the Static Bidet Cleaning function. 

Press it again to change to the Back-&-Forth Bidet Cleaning function.

*The Bidet refers the 4 water jets function of the nozzle.

SIDE CONTROL PANEL

SEAT

SENSOR

POWER

ECO MODE

WATER

TEMP

SEAT

TEMP

LIGHT INDICATOR PANEL

Summary of Contents for BERNARD IT-515




















Reviews: