Space Track
11
Ver 1.0
hotion.com
Control Menu Map
MENU
SUB MENU
OPERATION
A001
001-512
DMX address setting
STAT
Run if no signal
STA1
Blackout
STA2
Auto
STA3
Keep last step
U001
000-225
Manual dimmer
Fn
1.2F/4.8F/12F/24F
Frequency setting
LED
ON/OFF
Off screen setting (60 seconds)
DMX Protocol
1 Channel Mode
Function
Function Control
CH1
Dimmer
000-255: 0-100% dimmer
Fixture Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should
be carried out periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend clean-
ing on a monthly basis. Periodic cleaning will ensure longevity, and crisp output.
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of the fixture with low-pres-
sure compressed air.
3. Clean the surfaces by wiping gently with a soft, clean lint-free cloth moistened with a weak deter-
gent solution. Do not rub glass surfaces hard: lift particles off with a soft repeated press. Dry with a
soft, clean, lint-free cloth or low-pressure compressed air. Remove stuck particles with an unscent-
ed tissue or cotton swab moistened with glass cleaner or distilled water.
4. Check that the fixture is dry before reapplying power.
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions.
The fixture does not work, no light
•
Check the connection of power and main fuse. Be sure the external fuse has not blown.
•
Measure the mains voltage on the main connector.
