EN
2
Ovation F-55WW QRG Rev. 1
QUICK REFERENCE GUIDE
DMX Linking
The Ovation F-55WW will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available
from
DMX Connection
The Ovation F-55WW uses a 5-pin DMX for its DMX personalities:
1
,
2
,
or 5
. See the User Manual for information about
connecting and configuring the product for DMX operation.
Master/Slave Connection
The Ovation F-55WW uses the DMX data connection for its Master/Slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation F-55WW supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
for more details.
Mounting
Before mounting this product, read the
. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Control Panel Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the
selected function
<UP>
Navigates upwards through the menu list or increases the numeric value when in a
function
<DOWN>
Navigates downwards through the menu list or decreases the numeric value when in
a function
Mounting Clamp
Overhead Mounting
Safety Cable
