10
V5
www.hotion.com
Each CTC 300 Fresnel has a factory set RDM UID (unique identification number).
Note:
Before operation, enable RDM function in Advanced settings.
Rotary Knob function
The knob in the rear panel of the CTC 300 Fresnel act as multi function. Including rotary control of
dimmer, rotary control of dimmer, up/down/enter function function.
Dimmer & strobe function:
1.
Press the
MENU
button to enter the main menu.
2.
Press the
UP
or
DOWN
button to select
Mode
menu and press
ENTER
.
3.
Press
DOWN
menu and select
Manual
sub menu.
4.
Press
ENTER
and select
Brightness
or
Strobe
in third menu.
5. Rotate the rotary knob to control the dimmer(right stop = maximum output, left stop = zero output),
or strobe(right stop = maximum strobe, left stop = no strobe).
Note:
Rotary dimmer or strobe function works in
information Menu
and
Mode-Manual
menu.
Zoom function:
1.
Press the
MENU
button to enter the main menu.
2.
Press the
UP
or
DOWN
button to select
Mode
menu and press
ENTER
.
3.
Press
DOWN
menu and select
Manual
sub menu.
4.
Press
ENTER
and select
Zoom
in third menu.
5. Rotate the rotary knob to control the dimmer(right stop = minimum zoom scale, left stop = maxi
-
mum zoom scale)
Note:
Zoom function works in
information Menu
and
Mode-Manual
menu.
Quick switch between brightness and Zoom in Main menu(
information Menu
):
In
information menu(main menu)
interface, you can easily switch between brightness adjustment func
-
tion and zoom function.
1. Make sure the display in main menu, picture below.
2.
Press the
ENTER
button or the Rotary knob(which also perform Enter function) to switch between
the two functions.
