O
PERATION
Ovation B-2805FC User Manual Rev. 3
Master/Slave
The Master/Slave mode allows a group of Ovation B-2805FC products (the slaves) to simultaneously
duplicate the output of another Ovation B-2805FC (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the
Master/Slave
main level
2.
Select
Slave
.
To set the master:
1.
Go to the
Master/Slave
main level
2.
Select
Master
.
3.
Select an auto program as explained in Auto Programs, or a static setting.
Dimmer Profiles
This setting determines how fast the output of the Ovation B-2805FC changes when you modify the output
value. This setting provides four different options to simulate the dimming curve of an incandescent lighting
product.
1.
Go to the
Dimmer Mode
main level.
2.
Select a dimmer curve (
Off
,
Dimmer 1
,
Dimmer 2
, or
Dimmer 3
).
White Balance
This setting determines the maximum output values for each color, which affects the appearance of a full
output white.
1.
Go to the White Balance main level.
2.
Select
Off
(the product will use a default setting) or
Manual
.
3.
For
Manual
mode, select the color value to edit (
Red
,
Green
,
Blue
,
Amber
, or
Lime
).
4.
Set the maximum value for the selected color (
125–255
).
5.
Repeat steps 3 and 4 until the product outputs as desired.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation B-2805FC.
1.
Go to the
LED Frequency
main level.
2.
Select PWM Frequency (
600Hz
,
1200Hz
,
2000Hz
,
4000Hz
,
6000Hz
, or
25Khz
).
Fan Mode
This setting determines how the fan speed on the Ovation B-2805FC is set.
1.
Go to the
Fan Mode
main level
2.
Select
Auto
(fan speed will increase or decrease based on product temperature),
On
(fan speed
will always be at maximum), or
Off
(fan will always be off).
Display Orientation
This setting allows for selection of the display orientation.
1.
Go to the
Display
main menu,
2.
Select
Normal
(upright display) or
Inverse
(inverted display).
•
The master is the one that runs a program whether in Auto or Static mode.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Off:
The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3:
The output follows the dimmer value based on the corresponding dimmer
curve, DIM1 being the fastest.
NOTICE: When operating in Fan Mode: Off, output of the fixture will be reduced and
will not reach the same levels as when using other fan modes.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to
prevent burns. Keep a safe distance from flammable objects.
!
Summary of Contents for B-2805FC
Page 1: ...User Manual ...