Oval SP493613B, Instruction Manual

Page: 14 / 95

Measuring the Pool Wall
WARNING! A pool that is not level
is very dangerous and may collapse at anytime.
Check the pool wall level by placing a length of timber peam or similar across the diameter of the pool wall and
placing the builders level on the top pf the timber beam. (see diagram 24). If the deviation is more than 2cm (see
diagram 25) then the ground site must be level again. Check also if the pool wall is oval and measure the
diameter across a few spots to make sure the differences of each diameter measured are within 2cm.
If the levels are not to specification then the area will have to be leveled again.
CAUTION! Try not to damage any of the components when dissembling the pool wall to correct the level of the
ground.
Once the measurements and levels are correct and all nuts and bolts are tightened, then cover the exposed screw
heads with the Self Adhesive Tape
(See
Diagram 26 and 27).