Outsunny C00-034V91 User Manual Download Page 11

● Do not operate the appliance if it is visibly damaged. 

● Do not block the gaps on the fridge with any items. 

● Keep appliance out of rain and do not soak in water. 

● Do not place the appliance near naked flames or other heat sources (heaters, direct 

sunlight, ovens etc). 

● Do not store explosive substances such as spray cans with a flammable propellant. 

● Ensure the power cord is dry and not trapped or damaged. Do not place multiple 

portable socket outlets or power supplies at the rear of the appliance. 

● Check the voltage specification on the plate matches the energy supply. The appliance 

is only to be used with the power supply that is provided. 

● Do not use electrical appliances inside the food storage compartments, unless 

recommended by the manufacturer. 

● Before switching on, keep the appliance on a level surface for more than six hours. 

● Keep the appliance horizontal when on.

● Do not obstruct the ventilation openings of the appliance. 

● Keep the appliance stable on the ground or in the car. Do not drain upside down. 

● Repairs must only be carried out by qualified personnel. Incorrect repairs could cause 

danger. The lamp and power cord must be replaced by the manufacturer or qualified 

persons. 

● The installation of DC power in the boat must be done by a qualified electrician. 

● Children must be supervised to ensure they do not play with the appliance. 

● Under guided supervision, this appliance can be used by children aged eight years and 

above, provided they understand the potential risks and hazards. Under guided supervi

-

sion, the appliance can be used by persons with disabilities or persons without experi

-

ence, provided they understand the potential risks and hazards.

● Disconnect the power cord before cleaning and maintenance. 

● Do not use sharp tools to defrost. Do not damage the refrigerant circuit. 

Summary of Contents for C00-034V91

















Reviews: