1. Make sure the control knob (N) is in the
“off” posi�on.
2. Open the door (C) and slowly open the valve on the propane gas tank by turning
the knob counterclockwise.
3. Close the door (C) on the body.
4. Push and hold in the electronic igniter (R) to create sparks within the electrode,
con�nue to hold.
5. Push in the control knob (N
) and turn to the “HIGH” posi�on. Keep holding down
the control knob (N
) to allow gas to flow for 15 seconds.
6.
If igni�on doesn’t occur within a few seconds release
the control knob (N) and
rotate
to the “OFF” posi�on. Wait for 5 minutes for gas to clear and then repeat
the above ligh�ng instruc�ons.
7.
Once the fire product is lit,
the flame intensity may be controlled by turning the
control knob (N) between the
“LOW” and “HIGH” posi�ons.
1. Turn control knob (N
) clockwise to the “HIGH” posi�on; let the knob pop up and
con�nue turning the control knob (
N
) to the “OFF” posi�on.
2. Close the cylinder valve on the propane
gas tank if you don’t intend to use
it for a
long �me.
Before performing a leak test, be sure that no sparks can occur and you are in a
spacious outdoor area. Connect the propane gas tank to the regulator and turn
be a leak.
wear or abrasion you must replace the hose (if applicable). Pumice stones/lava rocks/
should be a yellow/blue color between 10 - 25 inches in height.
To light
-12-
