Outspot MOL-HA-DRY01, User Manual

Page: 8 / 44

4) INSTALLING AND USING THE DEVICE
First use
Open the packaging carefully before taking out the device. Make sure the device is
complete and undamaged. If any components are missing or damaged, contact the
vendor and do not use the product. Retain the packaging or recycle it in accordance
with local regulations.
• Remove all packaging from the device.
• Clean the device. Please refer to the 'cleaning and maintenance’ section.
Using the device
1) Attach the motor unit onto the base until it locks into place.
2) Open the zipper of one of the airbags and put the cover on the motor air outlet
and then install the air outlet vent onto the motor outlet and turn it clockwise to
lock it in place.
3) Using the device to iron shirts.
Install the two supporting tubes with the tube connector and put the top rack
on the supporting tube inside the shirt airbag.
10
1
5
6
7 8
EN06