En-10
1-888-514-1663
|
WWW.OUTLANDLIVING.COM
SECTION 1:
ASSEMBLY (continued)
STEP 7: PROPANE CYLINDER ASSEMBLY
Place an approved 9kg (20lb) propane cylinder in
to cylinder ring (Part 6). Couple the supplied gas
regulator to the propane cylinder (see section
labeled “Connection”). Perform LEAK TEST on all
gas couplings (see section labeled “Leak Test”).
Once all connections are verified to be secure, hand
tighten the cylinder collar to affix cylinder.
TIGHTEN CYLINDER
COLLAR
STEP 9: SIDE PANEL ASSEMBLY
Assemble (2x) Side Panels by fitting side
panel tabs on cross bars and pushing
closed.
To remove, simply use lift-rings and lift
panel away.
STEP 8: COMPARTMENT DIVIDER ASSEMBLY
Insert the wire Compartment Divider into holes
provided in the LP cylinder H-Frame support.
7
COMPARTMENT
DIVIDER
(2x) SIDE PANELS
9
