OUTPAW PetIdent 160, User Manual

Page: 13 / 92

13
The Outpaw PetIdent 160 is a reading device for RFID microchips &
RFID ear tags. It is equipped with an OLED screen to display the
detected chip number. The Outpaw PetIdent 160 can read all kinds of
FDX-B and ID64 RFID tags, with stable, safe and reliable performance.
A beep tone indicates the positive detection of a microchip. The
detected chip number will be displayed on the screen. In case the
device is connected to, e.g., a PC using the provided USB cable
while reading, the chip number will also be transmitted to your
computer. Therefore, e.g., a text file must be opened to record the
chip number.
To turn off the reader, then press the button and hold for 3 seconds.
Alternatively, the device will turn off itself after 180 seconds.
Using the Outpaw PetIdent 160
Function Button
Charging Port
Press the function button to
turn on the device.
Press the button again to go
into scan mode.
Screen the pet or animal
with the device. In pets, the
microchip is typically located
between the shoulder blades.
Be aware that in sporadic
cases, the chip could also
have moved or implanted into
a different location.