page 6
ET1.1-ST2 Electronic turntable
professional instruments
outline s.n.c. di noselli g. & c. - v. leonardo da vinci, 56 - 25020 flero (bs) - italy - tel. +39-30-3581341 fax +39-30-3580431
Web Site:
http://www.outline.it
E-Mail :
SAMPLE.STP
[GLOBALS]
COMPANY=MY COMPANY
;Company Name
TITLE=POLAR MEASUREMENTS
;Measurements Title
MANUAL=0
;Sets tests to automatic
KILLMESSAGE=1
;Kills any prompting message
CYCLIC=CYCLIC.STP
;Name of cyclic file for second turntable movement
REPETITION=72
;Number of measurements in a full circle for 5 degrees res
[MLS]
MLSOUT=0
;Output signal level = 0 dBu
MLSREFCURVE=TEST.MLS
;Name of file used as reference
MLSREFLIMITS=TEST.LIM
;Name of limits file .... don't care
MLSAUTOSAVE=1
;Sets QC to save every measurement
MLSTXTSAVE=1
;Saves file as a .txt document
MLSTXTSAVEPH=1
;Includes phase information in the ASCII output
[SIGNAL]
LPTBIT=4
;Controls first turntable with LPT BIT 4
STATUS=1
;Sets BIT 4 to ON
DELAY=100
;Sets duration of TTL pulse
LPTBIT=4
;Controls first turntable with LPT BIT 4
STATUS=0
;Sets BIT 4 to OFF
CYCLIC.STP
[GLOBALS]
COMPANY=MY COMPANY
;Company Name
TITLE=POLAR MEASUREMENTS
;Measurements Title
MANUAL=0
;Sets tests to automatic
KILLMESSAGE=1
;Kills any prompting message
[MLS]
; .... Dummy MLS measurement
MLSOUT=0
;Output signal level .... don't care
MLSREFCURVE=TEST.MLS
;Name of file used as reference .... don't care
MLSREFLIMITS=TEST.LIM
;Name of limits file .... don't care
[SIGNAL]
LPTBIT=5
;Controls second turntable with LPT BIT 5
STATUS=1
;Sets BIT 5 to ON
DELAY=100
;Sets duration of TTL pulse
LPTBIT=5
;Controls second turntable with LPT BIT 5
STATUS=0
;Sets BIT 5 to OFF
Important note
ST2 turntable has been developed to support max. 300 Kg weight loaded on the centre of gravity with not more
then 30 Kg twisting moment. It can be also loaded, for example fixed under the ceiling with 100 Kg hanging under
the turntable plate with the same twisting moment. Take care in handling and laterally moving very high weight on
the turntable's rotating plate; it can happens to break some cogs of the internal motor reduction gear. To avoid this
please keep the plate fixed during the loudspeaker loading.
