Connections and Configurations
A
B
C
D
A
Status Light-Indicates power and synch status
between the OAW3-t and OAW3-r wireless
components
Zone Switch-Three position switch the sets
the communication channel between the
OAW3-t and OAW3-r wireless
components
B
1/8” Analog Stereo I/O (input/output)
Port-Connect audio cables here (not required
when using USB direct to a computer or
media server)
C
Mini USB Port-Connect supplied USB cable
here as well as to the supplied power
adapter or USB I/O on your computer
D
Computer/Media Server
Computer to AV/Receiver or Processor
1. Connect supplied USB cable‟s Mini-USB connector to the
OAW3-r.
2. Connect the standard USB connector to the supplied USB AC
adapter.
3. Select the OAW3-r“Zone” setting that corresponds with the
“Zone” setting used on your OAW3-t.
4. Connect the 1/8” stereo connector into the 1/8” stereo jack
on the OAW3-r.
5. Connect the RCA cables to an unused input on your AV
Receiver. Consult your receiver or processor owner‟s manual
for proper configuration of this input.
(Note: Be certain that the power is turned off on your AV
Receiver prior to making audio connections.)
6. Connect the USB AC adapter to a power source and begin
streaming audio!
Now that your PC or Mac computer is configured to stream audio from the Outlaw Audio OAW3-t
wireless transmitter, you will now need to connect the OAW3-r to your audio system.
PC Configurations
1. Connect supplied USB cable‟s Mini-USB connector to the OAW3-t
2. Select the “Zone” setting you wish to use when transmitting audio to
your OAW3-r wireless receiver.
3. Connect the standard USB connector to an open port on your PC.
4. OAW3-t status light will rapidly alternate between red and blue,
finally settling on red after a 3-5 second synchronization scan.
5. Your PC will automatically recognized the OAW3-t as a USB Au-
dio Device. Please allow your PC to finish the installation process
before proceeding. A message will appear in the bottom right cor-
ner of your desktop stating “Your new hardware is installed and
ready to use.”
6. Your OAW3-t will is now configured as your computer or media
server‟s default audio playback device.
Note: It may be necessary to manually select USB Headset as the default
audio device under the audio tab of your computer‟s Sound and Audio
Devices menu located in the computer‟s Control Panel.
Apple/Mac Configuration
1. Connect supplied USB cable‟s Mini-USB connector to the OAW3-t.
2. Select the
“Zone”
setting you wish to use when transmitting audio to
your wireless receiver.
3. Connect the standard USB connector to an open port on your Mac
computer.
4. OAW3-t status light will rapidly alternate between red and blue
lights until it settles on red after a 3-5 second synchronization scan.
5. Click on System Preferences and select
“Sound”
under the
“
Hardware
” menu.
6. Click
“Output”
and manually select “
USB Headset”.
7. Your OAW3-t will now be configured as the default audio play-
back device on your Mac computer.
AV/Receiver or Processor to Subwoofer
Part 1: OAW3-t Wireless Transmitter
1. Connect supplied USB cable‟s Mini-USB connector to the OAW3-t.
2. Connect the standard USB connector to the supplied USB AC adapter.
3. Select the “Zone” setting you wish to use when transmitting audio to
your wireless powered subwoofer.
4. Connect the 1/8” mono connector into the 1/8” stereo jack on the
OAW3-t.
5. Connect the Yellow RCA connector to your receiver or processor‟s sub-
woofer/LFE output.
Part 2: OAW3-r Wireless Receiver
1. Connect supplied USB cable‟s Mini-USB connector to the OAW3-r.
2. Connect the standard USB connector to the supplied USB AC
adapter.
3. Select the OAW3-r “Zone” setting that corresponds with the
“Zone” setting used on your OAW3-t.
4. Connect the 1/8” mono connector into the 1/8” stereo jack on
the OAW3-r for use with an LFE/mono input on your powered
subwoofer, or the 1/8” Stereo connector for powered subwoofers
with stereo RCA inputs.
5. Connect the Yellow RCA connector or Red/White stereo RCA
connectors to your powered subwoofer. Consult your receiver/
processor as well as your subwoofer owner‟s manuals for the
proper configuration of your subwoofer.
6. You are now ready to enjoy your “wireless” powered subwoofer!
Part 1: OAW3-t Wireless Transmitter
Part 2: OAW3-r Wireless Receiver
Your Outlaw Audio OAW3 Wireless Audio Kit can be expanded through the use of additional wireless receivers and transmitters. While
you are limited to using three wireless transmitters in your system at any one time, there is no limit to the number of receivers you can use.
Since there is no limit to the number of OAW3-r wireless audio receivers you can use, your home audio system can have multiple wireless
subwoofers, as well as sound in every room of the house. Simply add an OAW3-r kit for each additional audio destination.
If you have multiple sources of audio around the home that you would like to make available to any of your wireless zones, you‟ll need ad-
ditional OAW3 Wireless Audio Kits-up to three per wireless audio network. When configuring your additional OAW3-t wireless audio
transmitters, simply set the second and third OAW3-t units to Zone 2 and Zone 3 respectively. You will then be able to duplicate the de-
sired zone setting on your OAW3-r receivers for instant access to additional sources.
Advanced Applications
Model OAW3
