background image

10

Outlaw Audio

Owner’s Manual

11

Model 200 M-Block Power Amplifier

Owner’s Manual

Outlaw Audio Limited Warranty

This warranty protects the owner of the Outlaw Model 200 Power Amplifier 
(the PRODUCT) for five (5) years from the date of purchase.
This warranty covers all defects in material and workmanship with the 
following specific exceptions. These are:
•  Damage caused by improper installation or adjustment
•  Damage caused by connection to AC power outside of the specified 

range

•  Damage caused by accident, unreasonable use or neglect
•  Damage from failure to follow instructions contained in this Owner’s 

Manual

•  Damage from the performance of repairs by someone not authorized 

by Outlaw Audio

•  Any unit on which the serial number has been effaced, modified, or 

removed

•  Damage occurring during shipment (Consult the carrier for claims 

due to shipping damage)

•  Units which have been altered or modified in design, appearance or 

construction

This warranty covers only the actual defects within the PRODUCT itself. 
IT DOES NOT cover costs of installation in (or removal from) a fixed 
installation, or normal set-up, claims based on any misrepresentation by 
the seller, or performance variations resulting from installation related 
circumstances such as signal quality, AC power or incompatibilities with 
speakers and/or other system components.
During the warranty period, Outlaw Audio will, at its option, either repair 
the defect, or replace the defective product, or the defective parts, or com-
ponents thereof at no charge to the owner for parts and labor covered by 
this warranty. If necessary repairs are not covered by this warranty, or if 
a unit is examined which is not in need of repair, you will be charged for 
the repairs and/or the examination. If non-warranted repairs are needed, 
we will notify you of the estimated cost and ask for your authorization 
to perform said repairs.
You must pay shipping charges incurred in getting your Product to the 
factory. We will pay the return shipping charges if the repairs are covered 
by the warranty. Please save the original shipping cartons, as the unit 
MUST be returned in the original carton and packing.

(Replacement cartons are available at a modest charge.)
If your product needs service, please call Outlaw Audio at 866-OUTLAWS 
(688-5297).
You will need to present the original bill of sale to establish the date of 
purchase. In the event that the proof of purchase cannot be established 
with the original receipt, the warranty period shall be determined by the 
earliest date of manufacture shown on the unit, provided that the serial 
number label has not been altered in any manner, or by our records 
relating to that serial number.
In the event that you wish to return your Outlaw amplifier back to us, for 
any reason, please call to arrange for a Return Authorization Number. 
This will ensure that your problem is discussed with a service technician 
who will determine if there is a quick solution to your problem.
Outlaw Audio shall not be liable for, or in anyway responsible for, inci-
dental or consequential damages of any kind. Some states do not allow 
limitations on how long an implied warranty lasts and/or do not allow the 
exclusion of incidental or consequential damages. Therefore, the limita-
tions and exclusions stated herein may not apply to you. This warranty 
gives you specific legal rights; and you may also have other rights, which 
may vary from state to state.
THERE ARE NO WARRANTIES GIVEN BY OUTLAW AUDIO, WHICH EXTEND 
BEYOND THE DESCRIPTION GIVEN HEREIN. ANY IMPLIED WARRANTIES 
OF FITNESS FOR PURPOSE SOLD, MERCHANTIABILITY, DESCRIPTION, 
QUALITY OR ANY OTHER MATTERS ARE LIMITED TO THE TERMS OF THE 
EXPRESSED LIMITED WARRANTY STATED HEREIN.
Products are sold on the basis of specifications applicable at the time of 
sales. Outlaw Audio shall have no obligation to modify products once 
they have been sold.
This warranty is applicable only in the United States.
For applicability in other countries, please call Outlaw Audio.
This document is Copyright ©2003 by Outlaw Audio, LLC. All Rights 
Reserved. Any unauthorized duplication, publication or distribution by any 
means or in any form, whether physical, electronic or otherwise is strictly 
prohibited without prior written consent from Outlaw Audio. LLC.

This product is guaranteed to satisfy all your needs for a high performance 
power amplifier. If for any reason, you are not completely satisfied with it, 
please contact us at 866-OUTLAWS (688-5297) within 30 days of receipt of 
the unit and you will receive a return authorization.
Please save all of your packing material in that the amplifier is heavy and 
can get damaged in shipping without proper protection. We recommend that 
you keep the packing (even after 30 days) so that if you ever move, the unit 

will be adequately protected.
If you decide to return the amplifier, the only cost you will be responsible for 
is the shipping charge to return it to us. When your amplifier arrives, we will 
inspect it to insure that it was shipped back to us in original condition. Upon 
satisfactory inspection, we will issue a full credit for your original purchase 
price plus your original outbound freight cost at standard ground shipping 
rate.

The Outlaw Audio 30-Day Satisfaction Guarantee

Outlaw Audio Limited Warranty

®

Summary of Contents for 200 M-Block













Reviews: