Outland Technology UWS-3310, Operating Instructions Manual

Page: 16 / 31

2. Control Functions
The monitor digital control functions are located on the front panel. They
are shown in the figure below and described in the following paragraphs.
1. Power indicator LED
2. Power switch
3. Function keys
Function Selection
1. Press the knob “MENU/SELECT” to show the OSD menu. Then use the
“
▲
” and “
▼
” to select a function. Press the knob “AUTO/EXIT” to close
the OSD menu.
2. With the knob “
▲
” and “
▼
” , you can adjust the speaker volume on the
monitor.
When you press the “
▼
”, the speakers are mute. Press the “
▲
” and
then the speakers are active.
When you press the knob “
▲
” , the speaker volume OSD is shown.
You can increase or decrease the volume by pressing the “
▲
” and
“
▼
”.
3. You can hold the knob “AUTO/EXIT” for more than 1 second to adjust the
image quality automatically.
The OSD menu will close automatically after 3-10 seconds without operation
and saves any changes you have made.
Function Adjustments
1. Signal Select
When there is no OSD menu display the knob “AUTO/EXIT” can select
VGA / DVI / CVBS / S-VIDEO.
5