8
9
0.10bar(1.45PSI) for chamber 1,2,3
Middle seat fixed buckle
Middle footrest
Valve
Single seat installation
1- Unpack and unroll the kayak on a flat surface, ensure the area is free of sharp
objects that can damage the kayak. Included in the box: Kayak, 2 Fins, Pump,
Deflation device, Foot Rest(s), Splash Covers and Backpack.
2-
BEFORE
inflating the Kayak, install the directional fins on the bottom of kayak
as shown in illustration below.
3-
BEFORE
inflating the Kayak, install foot rest(s) inside the kayak as shown in
illustration below.
4- Prepare Foot Pump by inserting the small Nozzle. Inflate the floor first.
5- Remove small nozzle from foot pump and replace with large nozzle, inflate
right and left chambers,
DO NOT FULLY INFLATE,
then place Splash Covers
over the front and back of Kayak.
6- Attach each end of Splash Cover to the Kayak, fully inflate all chambers.
7- Open the bottom of the seat to expose the inlet, using the small nozzle on the
pump inflate your seat.
8- Assemble Oar(s) as shown in illustration Now you are ready to enjoy your
Outdoor Tuff Kayak.
Assembly of the Oar(s)
INFLATING THE KAYAK
INFLATING THE KAYAK
Back seat
fixed buckle
Front seat
fixed buckle
Front footrest
Back footrest
Valve
Double seat installation
Deflation
Unscrew the valve cap (A), assemble the inflation adaptor with inflating
mouth B, air pressure meter and the air pump.
Caution: Do not over inflate, or use high-pressure pump. The maximum
pressure for all air chambers is 1.4 PSI (0.10bar). Over-inflation may
cause the chambers to burst.
Inflation
Remove the valve cap A, push down the deflation button (C) and turn the valve
clockwise by 90 degrees until it is locked. Release the valve and let the air flow out. If
you want to stop deflation, push down on the button (C) and turn it counter-clockwise
by 90 degrees. Deflation will stop once the valve is released.
