9
FAQ
Why is the red LED flashing twice every 20 seconds?
The battery is low. Recharge it.
Why is the red LED off when charging?
A. Make sure the connection between the charging
cable and the CHIPS® 3.0 is tight.
B. If the CHIPS® 3.0 haven’t been used in awhile, the
light may not come on immediately. Charge the
battery for at least 30 minutes.
Why can’t I pair my CHIPS® 3.0?
A. Your Bluetooth device and the CHIPS® 3.0 must both
be in pairing mode.
B. Your CHIPS® 3.0 should not be paired to any other
devices.
Why do I have Bluetooth signal loss/dropout/unclear
conversations?
A. Move your device closer to your CHIPS® 3.0.
B. Make sure your CHIPS® 3.0 are charged up.
C. Turn off your CHIPS® 3.0 and device, then power up
and reconnect.
Why can’t the CHIPS® 3.0 hear my voice during a call?
A. Make sure the CHIPS® 3.0 are on.
B. Make sure the volume is not too low or muted.
C. Make sure the CHIPS® 3.0 are properly connected
with your device.
D. Make sure the CHIPS® 3.0 are within range of your
device.
Summary of Contents for CHIPS 3.0
Page 1: ...CHIPS 3 0 HELMET AUDIO WIRELESS ...
Page 13: ...K Later gator ...
