Outdoor Revolution MoveAirLite Classic Annexe, Instructions & Care Manual, Page: 3 / 6

4
PLEASE READ THE FOLLOWING ERECTION
INSTRUCTIONS CAREUFULLY
TIP: Refer to the photograph to help when pitching your
MoveAirLite Classic Annexe
1. Spread the flysheet out on the
ground next to the door of the
caravan awning you wish to attach
it to.
2. Zip out the door on the caravan
awning and stow away somewhere
dry and clean.
3. Zip the annexe zip on to the zip on
the caravan awning doorway.
4. Before inflating the AirFrame Tube
make sure the Dynamic Speed Valve
quick release button is pressed out.
This makes sure the air will be held
inside the AirFrame tube.
5
5. Next, attach the pump to the
Dynamic Speed Valve and begin to
carefully inflate - taking care that no
part of the fabric is caught anywhere.
9. If the inner tent is not already clipped
in then lay the inner tent in the annexe
and starting at the back work your way
forward feeding the clips in to the
hooks.
7. Place the cap back in the valve and
cover with the Velcro sleeve to keep
the awning looking neat and tidy.
8. Then peg out and tension the front of
the annexe. Use the adjustable pegging
straps to tension the annexe as you
desire. Make sure you don’t over tension
the fabric.
6. Inflate the AirFrame until you can give it a
good squeeze. The tube needs to have
room inside for air to expand. Don’t worry if
you do keep inflating - the Intelligent Frame
will release any excess air. (Please note the
Intelligent Frame is set to a limit of 5.5psi
before it will release air.).