20.
Position Corner Bracket so
Joist Mount is flush with bottom of
Blocking or Main Joist and Post
Mount is flush against Post. When
in correct position, attach joist
mount to girder and joist/blocking
with 2 - 3” screws per side.
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 9
21.
With Bracket
centered on Post, attach
Bracket Post Mount to
Post with 6 - 2” Stainless
Steel Screws. Attach
remaining Corner
Brackets to Posts. There
will be two brackets per
post.
19.
Lift completed Left Sided Corner Bracket up and align bottom
of Bracket Spacer flush with bottom of Girder. At bottom of Corner
Bracket, align Post Mount evenly and tight against Post. When
correctly aligned, secure at top with 2 - 4” Screws. To secure Post
Mount, use 6 - 2” Stainless Steel Screws. Note, Post Mount and
Top of Bracket are pre-drilled.
Bracket
Spacer flush
with bottom
of Girder.
Important-
Posts may need to be aligned so they are
true and square to mount Corner Brackets correctly.
Use a Level to determine correct Post position.
Left Sided
Corner Bracket
4” screws countersunk
1/2” below surface.
