40
Outdoor Lifestyles by Hearth & Home Technologies • Fortress - ODFORTG-36 Installation Manual • 4602-901 Rev B • 8/17
C. Log Placement Instructions
1. Facing the indoor side of the fireplace and holding log #1
in your right hand with the widest end of the log toward
you. Place the log over the pilot, making sure to locate
notches in log over the first grate tine from right on the
far side and the first two grate tines from the right on
the closest side of the fireplace.
Log #1
Log #2
2. While holding log #2 in your left hand with the wide
end of the log away from you and the flat edge on the
bottom left, place the log over the left end of all three
burners, making sure to align the notches in the log with
the first grate tine from the left on both the far side and
the closest rear grates.
Log #3
3. Hold log #3 with the fat end to the left and the narrow
end to your right. Place the log over the lug on the top
of log #2 closest to the outside making sure to align the
bump on the narrow end against the inside edge of the
Figure 10.10
second tine from the right. Position log with the inside
face of the log perpendicular to the middle burner. Slide
log to the right, there will be a slight gap between the
right end of the log and log #1 (about 3/8 inch.)
4. Holding log #4 in your right hand with the narrow end
down, place the log on the lug of log #1 that is toward
the outside. Make sure to locate the notch at the narrow
end of the log over the third grate tine from the right. The
inside edge facing you of the log should rest against log
#3.
Log #4
Figure 10.11
Figure 10.12
Figure 10.13
NOTE: LOG PLACEMENT INSTRUCTIONS ARE FROM THE INDOOR SIDE OF THE FIREPLACE.
