background image

Congratulations

 

on your purchase of your new 

Smoke Hollow® Digital Electric Smoker. 

With proper set-up, operation and maintenance, this appliance will 

provide you with years of delicious food and cooking enjoyment.

IMPORTANT

When you un-pack your smoker, remove all parts and 

packaging material from the box and inside the smoker. 

Make sure you have all the items on the parts list. Carefully 

check the unit and make sure there is no damage.

IF YOU HAVE ANY PROBLEMS WITH THIS PRODUCT OR THERE ARE MISSING OR DAMAGED PARTS , 

PLEASE CALL CUSTOMER SERVICE TOLL FREE 1-866-475-5180 (Monday–Friday, 8:30 am–4:30 pm, CST).

NOTE : DO NOT RETURN UNIT TO THE STORE BEFORE CALLING THE TOLL FREE NUMBER. 

Do not dispose of your cartons until you are completely satisfied with your new Smoke Hollow smoker.

Warning:  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment. 

NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This 

equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES

4

Summary of Contents for Smoke Hollow Smoke-Tronix D4015B





























Reviews: