2”
1.5”
8.From the outside of each
corbel, measure 1.5” up
and 2” from the edge
touching the column and
pre-drill a hole with a 1/8”
drill bit. Insert a 2.5” Screw
to fasten the wall to the
corbel. (Only one screw per
end is required)
9.
Install
BATTEN STRIPS
as shown
using 6
1.25” SCREWS
per strip in
the pre-drilled holes . Batten
Strips can be placed on both or
either side of the wall to suit your
preference.
